YI Ultra Dash Camera Firmware Update

Latest firmware version: V-1.01.017

Device Requirement:

  1. One Class10 80 MB/s reading speed micro SD card, 8-64 GB
  2. One Windows PC
  3. USB power source, can be USB charging port or portable USB battery kit, 1A Output

Update Instructions:

A. If YI Ultra Dash Camera can boot normally

  1. Download update_c15.bin to the microSD card and put it in the root directory (make sure the file name remains update_c15.bin)
  2. Insert the microSD card in the camera
  3. Connect the camera to a power source, then switch on the camera
  4. A firmware update notice will pop up on the screen
  5. Press the fourth button (Power and Setting) to update
  6. Wait for 1-2 minutes before the update is successful and the camera is restarted
Notice: NEVER cut off the power source or shut down the camera while update is in progress.

B. If YI Ultra Dash Camera cannot boot normally, try push the reset button on the side of the camera with a pin. If the camera still cannot boot:

  1. Download update_c15_restore.bin to the microSD card and put it in the root directory (make sure the file name remains update_c15_restore.bin)
  2. Insert the microSD card in the camera
  3. Connect the camera to a power source, then switch on the camera. Push the reset button on the side of the camera with a pin when the YI logo display on the screen.
  4. Wait for 30-60 seconds before the update is successful and the camera is restarted
Notice: NEVER cut off the power source or shut down the camera while update is in progress.

US Toll FREE Number +1 (844) 234 8492 Mon-Sat 12:00AM - 5:00PM (PST)
UK Toll FREE Number +44 (0) 808 281 2452 Mon-Sat 8:00AM - 1:00AM (GMT)
Copyright ©2017 YI Technology. All Rights Reserved.Terms of Use | Privacy Policy